秦皇岛贝特化工科技有限公司
Item | Parameter |
Product Code | JSXN-III |
Appearance | Colorless to Grayish Yellow Liquid |
Density(g/cm³,20℃) | ≥1.0 |
PH Value | 2-5 |
Content of Aluminum Oxide (%) | ≥ 8.0 |
Oil Removal Rate (55℃±5℃, 50mg/L,%) | ≥ 70 |
Suspended Solids Removal Rate (55℃±5℃, 50mg/L,%) | ≥ 60 |
Quality Assurance Period | 12 Months |
The main component of flocculant for water injection treatment is inorganic polymer. Adding flocculant during the hydrolysis process can cause physical and chemical changes such as electrochemistry, coagulation, adsorption and precipitation to achieve the purpose of flocculation. It has excellent bridging adsorption properties and good coagulation-enhancing effect, so its adsorption and coagulation capabilities are both high. This product has a wide adaptability to the pH value of water. Compared with other conventional inorganic flocculants, it has the characteristics of fast coagulation speed, strong water quality adaptability (such as oilfield produced water, industrial sewage, etc.), good solubility, low corrosion, and no sediment.
Storage and transportation conditions
1. The flocculant need to keep the container tightly sealed when storing.
2. The flocculant should be stored in a cool and ventilated place, and should be kept away from heat and fire sources.
3.The flocculant should be protected from impact during transportation. It is strictly forbidden to mix with food for transportation.