How to use water treatment flocculant polyacrylamide PAM
1. Before use, the product needs to be dissolved into a solution state. Generally speaking, the polyacrylamide PAM solution should be diluted to 0.01%-0.05%.
2. When the agent is mixed with inorganic flocculant, it must be dissolved separately in two mixing devices.
3. When using, you need to add inorganic flocculant first, and then add polyacrylamide water purifier solution.
4. Because the performance of polyacrylamide PAM dissolved in water will decrease with time. And the lower the concentration, the faster the performance will decline. Therefore, polyacrylamide PAM products should be prepared when used and not dissolved in advance.
5. Anionic polyacrylamide PAM is suitable for alkaline media; cationic polyacrylamide PAM is suitable for acidic media; nonionic polyacrylamide PAM is suitable for acidic or weakly alkaline media. Polyacrylamide should not be stored in iron containers.
6. Polyacrylamide PAM is required to be stored in a cool, dry place to prevent moisture. During transportation, it should be loaded and unloaded with care, and no impact will be allowed to prevent damage.
